VMWARE ESX and P212

[marcus1234]

supportwelldon

unfortunately firmware cd still does not support 100 series servers ,
so options are easysetup cd or use supplemental firmwar posted above, or boot from usb stick with rom on it after creating a usb stick thats bootable with hp utility,

not used easy setup cd on this particular server it is actually not to be used on diff 100 series servers as they are a little diff.. and not compatible with each other ,so use the correct version ,

can u enter bios of sys board and post screen shot of the controllers and a screenshot showing which is selected for boot option,

also in the controller f8 screen shot of that , controller setup

and with the easy setup you can run diagnostics and post that it may reveal controllers and whats actually connected to what..