ProLiant Servers (ML,DL,SL)

Valid Data Found in Array Accelerator

Ayman Altounji
Valued Contributor

Valid Data Found in Array Accelerator

We recently had a drive failure on our ML 530 server, RAID 5 with an online spare. We unplugged the faulty drive, and plugged in the new 18Gb SCSI drive. It seemed to rebuild the drives fine, but after a short while the new drive started flashing and on now when we look at DAAD and drive diagnostics, we get the 'Valid data found in array accelerator' error. Would it be alright to again unplug the fault hard drive and re-insert another one, or is there a better option?

Many Thanks



P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). - Hp forum moderator