Ventillateur Serveur HP Proliant DL380 Gen8 tourne a fond

[MGADER]

Bonjour,

j'ai un serveur HP Proliant DL380 Gen8 suite à une coupure de courant, j e l'ai démarrer,il démarre correctement mais un grand bruit (bruit d'un ventillateur peut être du bloc alimenttaion)

j'lai démonter et netoyer mais même problème.

merci d'avance. 

[ksram]

Hi,

Thank you for the Post.

We understand you are facing loud noise issue on DL380 Gen8 Server.

It could be because the Fans may be spinning at higher speed and it may depends on multiple factors.

Please refer the below points : 

1) Since when the issue started? any recent changes during the Power cut

2) If the Air conditioning is proper

3) Reset iLO : iLO GUI > Diagnostics > Reset

4) Update the Firmware of the components one by one and check for the status

     i) iLO : https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2a4f6e276e9d4eac9d3716e50b

     ii) BIOS : https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_a5713a039d154a96aeb17be8de#tab-history

     iii) Array Controller Firmware : Need Array controller and Operating System details to share the links

5) Power Cycle the Server

Please share the observations.

Thank you

RamKS

[ksram]

Hi MGADER,

Good day!

Please share the Array Controller details so that we can check and share the Links.

Also if you have already has the link and if the above information shared were useful / if any more information is needed, kindly let us know.

Thank you

RamKS

[MGADER · Accepted solution]

J ai réinitialiser la carte ILO4 est s est résolu.
Merci beaucoup