HPE Community
ProLiant Servers (ML,DL,SL)
1753689 Members
5309 Online
108799 Solutions
New Discussion

Re: Video card upgrade locks up RAID Cntrl.

 
Ayman Altounji
Valued Contributor

‎06-06-2001 04:00 PM

‎06-06-2001 04:00 PM

Video card upgrade locks up RAID Cntrl.

I tried to install a PCI 32 Meg TNT2 video card, but the Raid controller
will not init and I get a NON-SYSTEM-DISK ERROR. Any idea on a known working video card setup.
System (2-450 MH Procs) and (256 Meg Mem). I disabled the onboard (switch1-s1) and tried all three PCI slots.
Any help would be appreciated.
0 Kudos
Reply
1 REPLY 1
Scott Prior
Occasional Advisor

‎09-04-2003 11:49 AM

‎09-04-2003 11:49 AM

Re: Video card upgrade locks up RAID Cntrl.

I have the same issue on my Proliant 6000 and Proliant 1600. I have video with no problem, but I can never get past the raid controllers during boot. when I use an older PCI card, it works fine, but on the newer ones, it doesn't work.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.