ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Video card upgrade locks up RAID Cntrl.

Ayman Altounji
Valued Contributor

Video card upgrade locks up RAID Cntrl.

I tried to install a PCI 32 Meg TNT2 video card, but the Raid controller
will not init and I get a NON-SYSTEM-DISK ERROR. Any idea on a known working video card setup.
System (2-450 MH Procs) and (256 Meg Mem). I disabled the onboard (switch1-s1) and tried all three PCI slots.
Any help would be appreciated.
1 REPLY
Scott Prior
Occasional Advisor

Re: Video card upgrade locks up RAID Cntrl.

I have the same issue on my Proliant 6000 and Proliant 1600. I have video with no problem, but I can never get past the raid controllers during boot. when I use an older PCI card, it works fine, but on the newer ones, it doesn't work.