ProLiant Servers (ML,DL,SL)
1748000 Members
4842 Online
108757 Solutions
New Discussion

Re: Virtual Media Disconnects from ILO

 
Kimik
Frequent Advisor

Virtual Media Disconnects from ILO

Hey All, just wondering if anybody else has problems with Virtual CD media disconnecting frequently from an ILO. I've seen this on multiple DL380G4's with ILO v1.8's. I envisage the problem could be upstream from the source workstation or network related, but still curious if there are known issues with this.
There's no present like time
1 REPLY 1
Prashant (I am Back)
Honored Contributor

Re: Virtual Media Disconnects from ILO

Hi,

Any ProLiant server configured with Integrated Lights-Out (iLO) running firmware Version 1.80 (or later).

A list of ProLiant servers with iLO is maintained at the following URL:

http://h18013.www1.hp.com/products/servers/management/riloe2/supported-servers.html

RESOLUTION
To insert the Virtual Media image, use the industry standard Command Line Protocol (CLP) commands. For additional information on the Command Line Protocol (CLP) refer to the following URL:

http://h18004.www1.hp.com/products/servers/proliant-advantage/standards.html

And also

Where we are using windows there can you check with the option of hiberation disabled then check it.

Regards,
Prashant S.
Nothing is impossible