ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

W2k srv problem during installation on DL140

Jacek Grzybowski
Occasional Visitor

W2k srv problem during installation on DL140

I have hp DL140 server with additional ATA RAID controller,USB CD-ROM drive and USB FDD. Hard disks are connected to ATA RAID device. I try install w2k sp4 server system following: press , press to add new driver, I choose driver and I continue installation process. When system is coping files appears request to insert driver disk to drive A: but system cannot read from this device because connection with USB FDD is lost. The same behavior is on Flash USB formated as FDD. How I should install w2k server on DL140 witout internall FDD drive to install it properly?
1 REPLY
Stephen Grimmer
Trusted Contributor

Re: W2k srv problem during installation on DL140

http://h18004.www1.hp.com/products/servers/platforms/usb-support.html

Check out the section titled...

Use of USB devices during OS installation

Looks like there is a download that will help you...

-Stephen