ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Want three physical drives configured as raid 0...no raid

GaryFuqua
Occasional Contributor

Want three physical drives configured as raid 0...no raid

I have a Prolient ML350P Gen 8.    I want to configure the three physical hard drives to be three separate drives.    I can't figure it out.   Smart Storage Administrator only allows me to create 2 array with one drive each.  Then I am stuck with one unassigned drive.     Cannot create more than three arrays.

 

There has got to be a way to make this most simple configuration...one drive = 1 logical drive, beyond two physical drives.

 

Help!?

 

 

1 REPLY
Torsten.
Acclaimed Contributor

Re: Want three physical drives configured as raid 0...no raid

Do you use the embedded P420i?

Is there a cache module installed?

The entry model has none.

 

From quickspec:

 

Logical Drives Supported
Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache
 

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!