Warm-Boot-Problem h240 in a proliant ml150g9

[Traugott]

Hallo,

since a few days I have a problem with rebooting an proliant ml 150 G9-Server, initialisation of the controller h240 seems to fail, the server not seeing harddisks now tries to boot from network. Cold boot works, the server is then running fine. Havent found any error messages. What can I do?

Regards

Traugott

[KK]

Hi Traugott,

Do you see any lockup code on the H240 during POST?

Recommended to upgrade the server with the latest BIOS version and H240 Controller firmware.

BIOS - https://internal.support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_d1ac51fb81da41f9858d224747#tab-history

H240 - https://internal.support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_e72e09a823154db2bd8dc779aa#tab-history

There are multiple fixes in the H240 controller firmware.

Upgrading the firmware should resolve the issue.

Regards,

KK

[Traugott]

Thanks for Your help,

controller BIOS is 7.0,  BIOS is old ( 2.52 ), I will do an update.

Regards

Traugott

[Traugott]

After applying BIOS Update 2.74 two reboots occured wothout any problem.

Hope now, problem is resolved.

Thanks a lot.

Regards

Traugott

[Traugott]

Hallo,

sad to say, the problem is not resolved. Have problems to reboot the server,

only cold-boot via ILO works.

RegardsTraugott