ProLiant Servers (ML,DL,SL)
1748185 Members
4245 Online
108759 Solutions
New Discussion

Re: Warning 219 in EvnetLog after Reboot

 
SOLVED
Go to solution
Klausi
Visitor

Warning 219 in EvnetLog after Reboot

After each Reboot of HP ProLiant DL 360 G6 with Windows Server 2008 R2 SP1 I receive a Warning in EventLog:

Source:        Microsoft-Windows-Kernel-PnP

Event ID:      219 - Task Category: (212) - Level:         Warning

Description:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&1&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_KVM&PROD_VMDISK&REV_0.01#7&B49E0C3&0&103430099AC&0#.

 

The Device Manager shows a warning in "Other devices" under "Base System Device" with no driver found

 

I already have installed the current "HP ProLiant iLO 2 Management Controller Driver for Windows Server 2008 x64 Editions" in version 1.14 - but that did only solve 2 out of 3 errors in Device Manager - even after reboot.

 

The Hardware IDs are

PCI\VEN_0E11&DEV_B204&SUBSYS_3305103C&REV_03

PCI\VEN_0E11&DEV_B204&SUBSYS_3305103C

PCI\VEN_0E11&DEV_B204&CC_088000

PCI\VEN_0E11&DEV_B204&CC_0880

 

Thanks Klaus

 

5 REPLIES 5
Suman_1978
HPE Pro
Solution

Re: Warning 219 in EvnetLog after Reboot

Hi,

 

You need to install "HP ProLiant Integrated Lights-Out Management Interface Driver".

 

Thank You!

I am a HP employee.


I work for HPE.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]

Accept or Kudo

Klausi
Visitor

Re: Warning 219 in EvnetLog after Reboot

I already updated the iLO Board Driver - but only to the Version 1.14.0.0 which is listed on the Drivers and Downloads page for the specific ProLiant DL360 G6 Server.

 

Your link pointed to Version 1.16.0.0 of the iLO Board Driver.

 

Thanks

Klausi
Visitor

Re: Warning 219 in EvnetLog after Reboot

Hallo together,

 

in April I tried your suggestion and installed version 1.16.0.0 of the iLO Board Driver but gave up since the problem had not been solved.

 

Does anybody have any other solution for above error message. It is still eppearing after each reboot.

 

Klausi

Klausi
Visitor

Re: Warning 219 in EvnetLog after Reboot

Problem SOLVED:

 

I found on another post that the problem can be solved with putting the Service:

http://www.sevenforums.com/drivers/268212-driver-driver-wudfrd-failed-load-device-error.html

 

There it is mentioned to put the Service "Windows Driver Foundation - User-mode Driver Framework" 

from Startup type "Manual" to "Automatic"

 

That solved the problem - even after several reboots.