Why can't I find socket 1 to replace memory!

[ServerPains]

I have a blade that keeps telling me that P2, socket 1 memory has failed. Looking at the manuals for the blade, I need two different possible socket layouts but the manual never calls them sockets, it calls them slots.

I've replaced the memory in the two outter edges of the P2 memory section but nothing changes.
I replaced all of the memory for P2, no change. I then replaced all of the memory for P1, no change.

It keeps complaining about socket 1 but manuals seem to differ where things are. In one manual., P2 is at the front, in another, P2 is on the rear. The blade is 650048-B21 but I cannot find a manual that is specifically for this model number.

Can anyone make sense of what is going on and what I need to change. Also, what does present but unused mean?

[ServerPains]

I installed new memory twice and it still shows the same.
I checked all of the memory slots with magnifying glass, no damage that I can see.

Really confused on why it says seen but not used and always the same 'socket' yet no mention of sockets in any manual other than processors.

[Suman_1978]

Hi,

Memory is present but unused.

This could just be a reporting issue, try updating BIOS and iLO for the server.

Thanks

[feigenL]

Please take a look at this:

HP ProLiant SL230s Gen8 Server Series - Configuring Memory

https://support.hpe.com/hpesc/public/docDisplay?docId=c03250296

HP ProLiant Gen8 Servers - Memory Architecture for Intel Xeon E5-2600 Series Processors

https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0109346

As mentioned before, make sure the server is running on the latest firmware

[ServerPains]

Can anyone share where I can find the latest updater ISO for these servers? Best I've been able to find is 2018.

There was a gen10 update that seemed to include gen8 servers but it fails with ...

'No data available in table'

[Kashyap02]

You can use the Gen8.1 SPP for firmware. 

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_ff582daf008c4f529c4d6c28f6

Note that you need to HPE Passport credentials to download the ISO. 

You can also download the BIOS and ILO from Below links. 

BIOS: https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_27bf81b32f354ca18b01728262#tab-history 

Download and extract the file to a folder. use the signed flash file from the extracted folder to update the BIOS from ILO. Reboot is required. 

ILO: https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_97f5079671c84a11ac776a92cb#tab-history

Download and extract it to a folder. use the .bin file to flash the firmware from ILO. 

[ServerPains]

Thanks but no, there is no support for these.

There is no value is paying for support on these old blades. Just trying to keep them out of the landfill as long as possible. HPE should be ashamed of itself for nickle and diming its customers to the end in this way. They make plenty of money to give at least ongoing updates.

Many companies keep updates open to anyone that uses their hardware, making it a lot easier to want to keep using it and keeping it out of the landfill for longer.