ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

What is key used to get into the boot menu? HP HD380 G3

 
SOLVED
Go to solution
BradTSS
Occasional Contributor

What is key used to get into the boot menu? HP HD380 G3

What is key used to get into the boot menu?  HP HD380 G3

5 REPLIES
yameen
Occasional Visitor

Re: What is key used to get into the boot menu? HP HD380 G3

I think F9

BradTSS
Occasional Contributor

Re: What is key used to get into the boot menu? HP HD380 G3

Thanks...It doesn't work at startup though, although it is a command to use in the bios.

Jimmy Vance
HPE Pro

Re: What is key used to get into the boot menu? HP HD380 G3

I don't recall the POST screen on a G3, it doesn't show the function key options durng POST?




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor
Solution

Re: What is key used to get into the boot menu? HP HD380 G3

What is a HD380?

Maybe a DL380 G3?

From DL380 G3 user guide:

After the auto-configuration process completes, or after the server reboots upon
exit from RBSU, the POST sequence runs, and then the boot option screen is
displayed. This screen is visible for several seconds before the system attempts to
boot from either a diskette, CD, or hard drive. During this time, the menu on the
screen allows you to install an operating system or make changes to the server
configuration in RBSU.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
breakaway
Occasional Visitor

Re: What is key used to get into the boot menu? HP HD380 G3

F11. The Answer is F11. 

At the end of the post sequence just before the system boots into the configured boot device, you get a menu with the following options

Press F9 for ROM-based Setup Utility

Press F10 for System Maintenance Menu

Press F11 for Default Boot Override Options <---- that's the one you want

Press F12 for Network Boot