What is the default port address used by ILO

[Silver_1]

Hi,

We have configred the ILO of a DL580. We can ping the ilo ip address but cannot do http://test01

The page doesn't comes up.

The server ip and the ILO ips are in a separate network and have firewall in between.

Any idea about the port used by ILO.

Any help is appreciated.

Tx

[Oleg Koroz]

You need to check few things
ILO Firmware, settings, try https instead http, java 1.4.x. Ver. ( don't use 1.5.xx)...

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257375/c00257375.pdf

[Oleg Koroz]

There is no default, except DNS from factory, however if you changed from F8 it's gone

[Ruslan]

Hi Nair! The problem relate to name resolution. Use ip address instead name. To resolve this situation manually register in WINS ip address of iLO

[Greg Healy_1 · Accepted solution]

iLO uses port 80(http) and then 443(https).
These need to be permitted within your firewall's "security policy"

Depending on the configuration of your firewall's "security policy" you may or may not be able to ping the iLO host.ie ICMP is blocked.

For name resolution also check to see if the iLO has been populated into DNS.

If you use dynamic addresses (DHCP) for your iLO, automatic DNS registration may need to be configured in your DHCP server.

Note the name of the iLO will remain the factory default until changed. something like "ILOxxxxxxxx.domain.name."

If you are using static ip addresses for iLO then you need to populate the DNS manually. like "server-rc" or "server-ilo"

[Oleg Koroz]

IP address or IP port?

Open Page 10 for Link provided before

For an iLO device to work properly when going across routers using port blocking and/or firewalls, ports 23, 80, 443, and 17988 must be open. Port 23 is for the Telnet ports where the remote and graphical Remote Console is used, port 80 is for HTTP communications, port 443 is required for the SSL connection, and port 17988 is for Virtual Media. The inability to access the iLO management ports is often confused with incorrect proxy settings. When in doubt, disable proxy in Internet Explorer or Netscape.

[Silver_1]

KOV is right.