ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

What is the default port address used by ILO

SOLVED
Go to solution
Silver_1
Regular Advisor

What is the default port address used by ILO

Hi,

We have configred the ILO of a DL580. We can ping the ilo ip address but cannot do http://test01

The page doesn't comes up.

The server ip and the ILO ips are in a separate network and have firewall in between.

Any idea about the port used by ILO.

Any help is appreciated.

Tx
6 REPLIES
Oleg Koroz
Honored Contributor

Re: What is the default port address used by ILO

You need to check few things
ILO Firmware, settings, try https instead http, java 1.4.x. Ver. ( don't use 1.5.xx)...

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257375/c00257375.pdf
Oleg Koroz
Honored Contributor

Re: What is the default port address used by ILO

There is no default, except DNS from factory, however if you changed from F8 it's gone
Ruslan
Respected Contributor

Re: What is the default port address used by ILO

Hi Nair! The problem relate to name resolution. Use ip address instead name. To resolve this situation manually register in WINS ip address of iLO
Greg Healy_1
Occasional Advisor
Solution

Re: What is the default port address used by ILO

iLO uses port 80(http) and then 443(https).
These need to be permitted within your firewall's "security policy"

Depending on the configuration of your firewall's "security policy" you may or may not be able to ping the iLO host.ie ICMP is blocked.

For name resolution also check to see if the iLO has been populated into DNS.

If you use dynamic addresses (DHCP) for your iLO, automatic DNS registration may need to be configured in your DHCP server.

Note the name of the iLO will remain the factory default until changed. something like "ILOxxxxxxxx.domain.name."

If you are using static ip addresses for iLO then you need to populate the DNS manually. like "server-rc" or "server-ilo"

Oleg Koroz
Honored Contributor

Re: What is the default port address used by ILO

IP address or IP port?

Open Page 10 for Link provided before

For an iLO device to work properly when going across routers using port blocking and/or firewalls, ports 23, 80, 443, and 17988 must be open. Port 23 is for the Telnet ports where the remote and graphical Remote Console is used, port 80 is for HTTP communications, port 443 is required for the SSL connection, and port 17988 is for Virtual Media. The inability to access the iLO management ports is often confused with incorrect proxy settings. When in doubt, disable proxy in Internet Explorer or Netscape.
Silver_1
Regular Advisor

Re: What is the default port address used by ILO

KOV is right.