ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

What is the meaning of the LED's in my ARRAY ?

SOLVED
Go to solution
Rob Koper
Occasional Visitor

What is the meaning of the LED's in my ARRAY ?

Every drive in my array has 3 led,s. Now suddenly 1 has been blinking, but is steady again now.
I was wondering what the meaning was of all 3 lights.
I know it has something to do with "operational", "rebuilding" and "defect", but I'm not sure about the order of all 3.
3 REPLIES
Brian_Murdoch
Honored Contributor
Solution

Re: What is the meaning of the LED's in my ARRAY ?

Hi Rob,

I hope the attached image explains the LED combinations and how to interpret them.

Regards,

Brian
Vijay_44
Honored Contributor

Re: What is the meaning of the LED's in my ARRAY ?

The arrow LED indicates drive activity. The "cylinder" LED indicates that the drive is online and part of an array when connected to an array controller. The fault LED indicates a problem with the drive. In the newer drives when the fault led blinks it indicates a pre failure. If the online LED is blinking it indicates a rebuild or firmware update. If all the LEDS are blinking the array or the drive is selected in the ACU.
There’s your problem!!! This thing is set to EVIL!
Rob Koper
Occasional Visitor

Re: What is the meaning of the LED's in my ARRAY ?

thanks, I was looking for exactly this explanation. This helps !

Thanks again.
Rob