Why HP Tools are not available in SLES10 for DL360 G4 systems

[Bhuvaneswar]

Why HP Tools are not available in SLES10 for DL360 G4 systems? Where as they are availabe for G4P and G5 systems.

[Mi6t0]

Normal - because it is not supported.

Check here:
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-novell.html

Regards,

[Bhuvaneswar]

But in that website G4 is not at all listed. Can we conclude from that webpage that HP will not support SLES10 for G4 systems??

[Blazhev_1 · Accepted solution]

Hi,

it is supported, check here:

http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-archive-novell.html

the drivers are listed under the performance model - G4p. From the link above, when you click on the tick where dl360 g4 and SLES 10 are crossing you will get :

http://h18004.www1.hp.com/products/servers/linux/dl360g4-drivers-cert.html

and when you select SLES 10 under drivers you will be forwarded to the SLES10 software & downloads for DL360 G4p , which are of course the same...

Pac

[Mi6t0]

Hi, My mistake :)

http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-archive-novell.html

This is the supportos archive. So suse10 should work!

Please, try downloading the Proliant support Pack for DL360G4p.

Regards,

[Bhuvaneswar]

Thank you very much for your replies.

[Bhuvaneswar]

Based on the replies, I found the solution.

Thanks,
Bhuvan