ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Why HP Tools are not available in SLES10 for DL360 G4 systems

SOLVED
Go to solution
Bhuvaneswar
Occasional Contributor

Why HP Tools are not available in SLES10 for DL360 G4 systems

Why HP Tools are not available in SLES10 for DL360 G4 systems? Where as they are availabe for G4P and G5 systems.
6 REPLIES
Mi6t0
Trusted Contributor

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

Normal - because it is not supported.

Check here:
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-novell.html

Regards,
Bhuvaneswar
Occasional Contributor

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

But in that website G4 is not at all listed. Can we conclude from that webpage that HP will not support SLES10 for G4 systems??
Blazhev_1
Honored Contributor
Solution

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

Hi,

it is supported, check here:

http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-archive-novell.html

the drivers are listed under the performance model - G4p. From the link above, when you click on the tick where dl360 g4 and SLES 10 are crossing you will get :

http://h18004.www1.hp.com/products/servers/linux/dl360g4-drivers-cert.html

and when you select SLES 10 under drivers you will be forwarded to the SLES10 software & downloads for DL360 G4p , which are of course the same...

Pac
Mi6t0
Trusted Contributor

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

Hi, My mistake :)

http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert-archive-novell.html

This is the supportos archive. So suse10 should work!

Please, try downloading the Proliant support Pack for DL360G4p.

Regards,
Bhuvaneswar
Occasional Contributor

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

Thank you very much for your replies.
Bhuvaneswar
Occasional Contributor

Re: Why HP Tools are not available in SLES10 for DL360 G4 systems

Based on the replies, I found the solution.

Thanks,
Bhuvan