ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Will not boot after new memory is installed

Ayman Altounji
Valued Contributor

Will not boot after new memory is installed

After installing 4X64MB EDO memory (taking the server total to 512Mb), the server refuses to restart. I hear the post check beep and the drive lights come on (but do not spin up) the server does not initialize the graphics card or bootstrap any further (so I can't boot to the configuration setup). If I remove the new memory modules the system restarts fine. I have checked and reseated the memory and it is grouped in to the respective banks correctly.. Any help would be much appreciated:)
1 REPLY
Ayman Altounji
Valued Contributor

Re: Will not boot after new memory is installed

This may indicate that you do not have buffered DIMMS. The correct option part # for 4X64 meg EDO Buffered DIMMS is 256-MB Memory Kit (4 x 64-MB Buffered EDO DIMMs) 328581-B21