HPE Community
ProLiant Servers (ML,DL,SL)
1752648 Members
5555 Online
108788 Solutions
New Discussion

Windows 2000 Installation Hangs

 
Ayman Altounji
Valued Contributor

‎04-01-2001 04:00 PM

‎04-01-2001 04:00 PM

Windows 2000 Installation Hangs

Cannot install windows 2000 or NT4 server. Always hangs. Have tried with 2p array controller and 3200 and internal scsi. Same results ---- always hangs
0 Kudos
Reply
1 REPLY 1
Mark Cloutier
Respected Contributor

‎11-18-2001 04:00 PM

‎11-18-2001 04:00 PM

Re: Windows 2000 Installation Hangs

before you install on this system you have to go to the f10 and make sure two things are set...1) the primary operating system is set to the one you are installing..2) the boot controller order is set to the devices and way you are installing
also are you using smartstart? if so make sure there is no 3rd party hardware in the system as smartstart will hang as it is not designed for third party installations
We are here for a good time, not a long time!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.