Windows 2003 Service Pack 1 & ProLiant ML370

[Matthias Haenggi]

Dear all,

Did anyone already install the recently released service pack 1 for Windows 2003 on a ProLiant ML370? Is that save? Will all HP applications work properly? What does HP recommend?
I have heard of stability isses (server reboots etc.) with release candicate 2.

Thanks for any comments.

Kind Regards,
Matthias

[weik]

Hello Matthias

I have installed SP1 yesterday in the morning on a Cluster Node. No problems detected (bis jetzt).
The Support Pack Version 7.20A have i installed bevor.
On the Cluster are a FC Array and a RA4000.

Take a look at the MS Windows Firewall... on my Cluster are DHCP service and i must open the Ports for this service.

kurt

[jimmy-sz]

hi guys,

actually I installed the W2K3 SP1 just right now. And at the first start it seems 3 services cannot start automatically nor manually;

Insight web agent
Insight storage agent
Insight foundation agent

Anybody who face to the same problem?


thanks:
jimmy

[Tv_3]

You have to update or reinstall the lastest Proliant Supportpack 7.30. There are some issues.


http://h18007.www1.hp.com/support/files/server/us/download/22274.html


It is also possible that old compaq services are replaced with new HP services.
You may have to manualy disable them if a new HP agents exists.



greetzz

hope it helps.

[amhakassa]

HI All,

To avoid such issues the best way is to first update the system with the latest Proliant Support Pack (PSP) which will be download from this link
http://h18007.www1.hp.com/support/files/server/us/download/22274.html
and then after that apply or reapply the windows 2003 SP1.

Regards
Amha Kassa