Windows 2008 and server ML310 driver

[Rafael Martinez Garcia]

Hi, I have a server HP ML310. I installed a windows 2008 and I upgraded the firmware of server but, The system say me that a driver is not installed (Bus PCI, see attach), and I have a dispositive on bus PCI that doesn't work. I see the web page of HP but I don't see any driver for that...

Can you help me, please?

thank you in advance

[Rafael Martinez Garcia]

The server is ML310 G2.. excuse me.. :D

[Jan Soska · Accepted solution]

hello,
your server is really old. Is it a must to run win2008 on it? Couldn't you downgrade to win2003?
Anyway, have you installed all drivers etc. appropriate to your system os from http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3279691&taskId=135&prodTypeId=15351&prodSeriesId=434814〈=en&cc=us ?

jan

[Rafael Martinez Garcia]

Yes, I install all drivers, but it doesn't work. :(

thank you very much

[Trygve Henriksen]

Hm...

All that tells me is that it has detected 'something' on the PCI-bus that it doesn't have the correct drivers for.
(The PCI-bus itself looks good)

I would take a good long look at what kind of devices are instaleld on the server, and which ones seems to be missing in that list.
(I can't see USB-devices listed. Does this server have USB-ports?)

[Rafael Martinez Garcia]

yes it has usb ports

thank you

[Rafael Martinez Garcia]

Other thing... That server before install windows 2008, ran windows 2003 and a dispositive in a pci bus and It was OK...

I want to run windows 2008 if it's possible..

thank you

[Trygve Henriksen]

I don't know what 'dispositive' means
(Google Translate is no help... )

But generally, if the server seems to be running, and the device that is missing a driver isn't needed, you can just disable it in the device manager, and Windows will stop bothering you about it.