HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Windows NT will not start for the first time...

 
Ayman Altounji
Valued Contributor

Windows NT will not start for the first time...

can install NT server but when it asks me to remove the CD and reboot, it stays on the first blue screen doesn't start anymore, I upgraded the firmware but its still the same. It gives me no spesific error messages, It just sits there and does nothing... Help Please?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Windows NT will not start for the first time...


You need to download and install the NT 4.0 OS using the required Compaq driver disks from this web address.

http://www5.compaq.com/support/files/server/us/download/9192.html

Scroll down to the floppy disk version. See the readme files on the disks for installation instructions.


With some older versions of the Microsoft NT 4.0 install CD, you have to make the three NT 4.0 install boot disks with the /i386/WINNT.EXE command. The required Compaq drivers will not be installed if you boot the system with some of the oldr NT 4.0 CDs. You have to use the install method to add the Compaq drivers during the OS install.