Windows Server 2008 x64 Sata embedded raid driver - Proliant ML110 G5

[George Dr]

I have a problem with ProLiant ML110 G5. After building RAID 1 (2 SATA HDDs) i can not install Vista Business. The Setup unpacks files during installation and reboots untill the Microsoft Corporation screen is displayed for 5 sec, then it shows a BSOD for 0.2 sec and reboots again. Is there any solution for my problem or not? I need Vista Business on this server and working RAID 1.

Thanks in advance.

[stevejones13]

Hi All,

I am experiencing similar problems trying to install Windows server 2008 FOUNDATION on an ML110 G5

I tried downloading the 64 bit and 32 bit SATA drivers (sp008698 and sp008697)but neither will show up when trying to browse for drivers during install.

I note that Server 2003 just finds and loads drivers for the embedded SATA array controller. Seems we are going backwards here. Any advice welcome! Has anyone out there managed to load FOUNDATION 2008 on an ML110 G5?

regards Steve

[Francis Fuller]

The folowing URL is a MAN page that lists the steps to install the embedded RAID on an ML110 G5. It also includes links to both 64bit and 32 bit drivers.

URL--->

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=3577708&prodTypeId=15351&objectID=c01540760