ProLiant Servers (ML,DL,SL)
1748205 Members
4481 Online
108759 Solutions
New Discussion юеВ

Windows won't load on DL360 G2

 
SOLVED
Go to solution
LordWatchdog
New Member

Windows won't load on DL360 G2

G'day all,

I seem to be having trouble getting Windows 2000 Advanced Server to load on a second hand DL360 G2 I bought the other day.

Current conditions:

1. Server starts and runs through POST screen with no troubles.
2. Green "drum" LEDs light up on both 36GB drives and information on the screen and in RAID set up indicate that both physical and logical drives are available.
3. Windows loads all drivers at the beginning of the set up procedure but when it asks the installer (ie: Me) if I want to install Windows, I press ENTER to install and then am told that Windows cannot find any physical drives.
4. Windows CD is known to be good.

Any assistance would be greatly appreciated.


Brad.
5 REPLIES 5
sandeep_raman
Honored Contributor
Solution

Re: Windows won't load on DL360 G2

Hello Brad,

Looks like you are doing a manual install and Windows OS base media does'nt have the device driver for SA 5i controller.

Boot through the SSCD which will load the 5i drivers,configure array,select Win 2k and place the OS base media when asked.

http://h18023.www1.hp.com/support/files/server/us/download/25190.html

SRH
Brian_Murdoch
Honored Contributor

Re: Windows won't load on DL360 G2

Hi Brad,

As Sandeep has pointed out, Windows 2000 doesn't have the driver for your Smart Array controller so it can't see the disks if it can't speak to the controller.

As an alternative to Smartstart install, you can download the Smart Array driver to floppy and install using F6 when loading Windows 2000. (Instructions on this page)

http://h18023.www1.hp.com/support/files/server/us/download/24794.html

Once you have loaded the O/S you can apply the Proliant Support Pack (PSP) for Windows 2000. This loads all the Compaq/HP drivers for embedded and add-on controllers.

http://h18023.www1.hp.com/support/files/server/us/download/24183.html

These two actions are roughly equivalent to a Smartstart install from scratch. If you need any individual drivers, firmware or BIOS for your DL360G2 after that look here.

http://h18023.www1.hp.com/support/files/server/us/locate/20_2543.html

I hope this helps.

Brian


LordWatchdog
New Member

Re: Windows won't load on DL360 G2

Thanks fellas. I am off to work at the moment but I will check things out once I am home and I'll let you know how I go. In the interim, thankyou for your answers.

Brad.
LordWatchdog
New Member

Re: Windows won't load on DL360 G2

Thanks guys, the advice paid off and the server is now working. Now time to do the usual stuff like network card drivers and security :-)

All part of the fun.
sandeep_raman
Honored Contributor

Re: Windows won't load on DL360 G2

Glad it worked,if you feel the responses were of help, http://forums1.itrc.hp.com/service/forums/helptips.do?#34

SRH