HPE Community
ProLiant Servers (ML,DL,SL)
1753814 Members
7947 Online
108805 Solutions
New Discussion

Wires can be cut.

 
Ayman Altounji
Valued Contributor

‎11-30-2000 04:00 PM

‎11-30-2000 04:00 PM

Wires can be cut.

If you put a smart array 4200 in SLOT # 1 and run the scsi cable to it from the drive cage. There is a good chance you will cut the scsi cable when removing the top cover. Ther are two metal hinges from the HOT-PLUG door that hang straight down. These hinges will cut the cable. Open the hot-plug door before you slide off the top cover. You should be able to see the hinge rub on the cable. Compaq is aware: Case # NA001201031098.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎12-04-2000 04:00 PM

‎12-04-2000 04:00 PM

Re: Wires can be cut.

Thank you for this information. We are investigating the problem you have reported. When a permanent solution is determined, Compaq Engineering will probably release a customer advisory.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.