HPE Community
ProLiant Servers (ML,DL,SL)
1751911 Members
4669 Online
108783 Solutions
New Discussion юеВ

Re: XML on iLO

 
PaulL_1
Occasional Contributor

тАО10-01-2003 09:48 AM

тАО10-01-2003 09:48 AM

XML on iLO

On an iLO in a DL380 G3 v1.41, what is the XML comands to change the 'Require Login for iLO RBSU' from a yes or a no. Have done a GET_GLOBAL_SETTINGS command but it does not give me the setting at all.

Thanks
0 Kudos
Reply
2 REPLIES 2
Jeff Mathews
Respected Contributor

тАО10-03-2003 02:43 AM

тАО10-03-2003 02:43 AM

Re: XML on iLO

Hi Paul, I could be wrong here, but I didn't think this was possible through the XML commands. I thought you had to set the jumper on the main board for this to happen. Anyone know any better?

Jeff
0 Kudos
Reply
David Bonham_1
Advisor

тАО12-03-2003 06:34 AM

тАО12-03-2003 06:34 AM

Re: XML on iLO

I'm not much help, but I can confirm that I can't get the setting using the Get_global_settings xml command either. I started another thread in the ITRC/Management software and system tools/remote lights-out management (RILOE II, iLO) forum.

Go.
/dev/null
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.