cancel
Showing results for 
Search instead for 
Did you mean: 

XML on iLO

PaulL_1
Occasional Contributor

XML on iLO

On an iLO in a DL380 G3 v1.41, what is the XML comands to change the 'Require Login for iLO RBSU' from a yes or a no. Have done a GET_GLOBAL_SETTINGS command but it does not give me the setting at all.

Thanks
2 REPLIES
Jeff Mathews
Respected Contributor

Re: XML on iLO

Hi Paul, I could be wrong here, but I didn't think this was possible through the XML commands. I thought you had to set the jumper on the main board for this to happen. Anyone know any better?

Jeff

Re: XML on iLO

I'm not much help, but I can confirm that I can't get the setting using the Get_global_settings xml command either. I started another thread in the ITRC/Management software and system tools/remote lights-out management (RILOE II, iLO) forum.

Go.
/dev/null