ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Y-cable for Integrated Management Display (IMD)

 
SOLVED
Go to solution
Tim Barrett_3
Occasional Contributor

Y-cable for Integrated Management Display (IMD)

It seems that in order to use the IMD with a ProLiant 1600, you need a Y-cable. Does anyone know the part number of that cable? Or is there a PDF document about the IMD? Thanks a bunch!

Tim Barrett
Rehab Designs, Inc.
2 REPLIES
Sunil Jerath
Honored Contributor

Re: Y-cable for Integrated Management Display (IMD)

Hello Tim,
That cable is part of the cable kit and the part no is 306565-001. IMD usually comes equiped with it's cable. The P/N for IMD and cable is:
Integrated Management Display w/cable 271930-001
I shall confirm it for you so dont order it yet.

Regards,
Sunil Jerath
Honored Contributor
Solution

Re: Y-cable for Integrated Management Display (IMD)

Hello Tim,
Yes I just confirmed it and the part no I provided earlier is correct. Once again The assembly number of the cable is 283685-001 and can be ordered as a spare part with spn-306565-001. This is a Misc. Cable Kit for the Proliant 3000 and will work with the Proliant 1600, Proliant 1200 and Proliant 800 as well.

Regards,