ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Yellow Question Mark on Device Management

Sony Chen
Occasional Visitor

Yellow Question Mark on Device Management

Dear All;

I have 2 server DL180 G6 out of box then installed with Windows Server 2003 X32 Standard
running smoothly with RAID 5.

But when i checked on device management i found 5 yellow question mark, e.g: 2 unknown device and 3 system interrupt controller.

Any advice for my problem...

i check on the forum and some advice said must install the HP NULL IPMI Controller drivers but just for windows 2003 x64.

Thanks a lot.
4 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: Yellow Question Mark on Device Management

hi,

actually in december we installed, 6 machines Dl180G6, and on the CD that was delivered to this servers there wase all drivers for the installation.

Installed OS :

Windows 2003 standard R2 32 bit, without any problem.

At friday i'll be in the office so if you need the cd i could make a image and put in on the FTP.

mikap
Sony Chen
Occasional Visitor

Re: Yellow Question Mark on Device Management

Sure, if you don't mind...please upload to ftp.

Thanks again
Lenny_11
Advisor

Re: Yellow Question Mark on Device Management

Hello,

I'm working on an issue with the DVD (optical drive) showing an exclamation mark in device manager on a win2003 STD R2 32-bit.

Anyone have luck finding HP ProLiant 100-Series Management Controller Driver for Windows Server 2003 - 32-bit?

Thanks,
Michal Kapalka (mikap)
Honored Contributor