activating SSH support on BMC firmware 1.21

[Edouard Bourguignon]

Hello,

i'm trying with no success to import a sshkey file on the BMC on our DL145G2

The command as shown in the "HP Proliant DL140 and DL145 G2 ilo100 Remote Management Processor User Guide" is the following:

load -source //
(in /map1/firmware directory)

But it fails with the error message: Invalid Parameters.

so what is wrong? certainly a syntax problem but i can't find any other docs on loading/activating ssh on this BMC firmware. Any Idea?

[MRjackson_1]

I'm having the same problem although I'm using the following versions.

IPMI Version 2.0
Firmware Version 1.22
Hardware Version 3.0
BIOS 2.14

Have you had any luck getting this to work?
I'm also having trouble using the virtual floppy over tftp.

[MRjackson_1]

I've been able to successfully load an ssh key.

What messed me up was a typeo in HP's documentation.

In the load command, change the capital 'T' to lowercase in the '-oemhpfileType' flag and the load should work.

ssh connections are really slow though, please let me know if you experience this too.