HPE Community
ProLiant Servers (ML,DL,SL)
1753521 Members
5198 Online
108795 Solutions
New Discussion

Re: adding a new videoadapter problems

 
Ayman Altounji
Valued Contributor

‎03-06-2001 04:00 PM

‎03-06-2001 04:00 PM

adding a new videoadapter problems

I disabled the embedded videocontroller with the switch on the motherboard and added the Jeronimo Pro dual SVGA card. However, in the bios setup seems impossible to disable the embedded controller and Device manager in W2K shows the 2 video adapters, the new one and the embedded, so this won't work. What is the problem here ? How can I really disable the embedded video-
controller ?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎03-14-2001 04:00 PM

‎03-14-2001 04:00 PM

Re: adding a new videoadapter problems

You don't need to turn it off in the BIOS setup... Once it's disabled on the system board (by that switch) it's really not there. One thing though - what firmware version is this system using now?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.