ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

array boot order

marco turri
Occasional Visitor

array boot order

Hi, i have a prliant 350 G5 with a smart controller with an array of three raid 5 36GB disks. I have bought 3 146GB disks and i have created a second array in raid5. Automatically the system boot from the second array and not from the first one: could i change the boot array to continue booting from the first?

many thanks
3 REPLIES
TTr
Honored Contributor

Re: array boot order

There is boot disk order in the RBSU (BIOS) that you can check.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00191707/c00191707.pdf
marco turri
Occasional Visitor

Re: array boot order

ok, my server starts correctly from smart array controller. the problem is that it does not start from the first array but from the second (the new one) and i have not found any hint on change the array boot order

could anyone help me?

many thanks
TTr
Honored Contributor

Re: array boot order

In page 114 at the top, do both arrays show up as IPL enties? If so change the order so that the first array is ILP #1.