ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

baseline not found : SPP to Proliant DL360 gen9

dudepassingby
Occasional Visitor

baseline not found : SPP to Proliant DL360 gen9

hi, I'm currently having problem with applying SPP ver. 20171001 to Proliant DL360 gen9.

I install the ISO on dvd media, it stops at the SUM with

"loccalhost   Failed to add baseline         No default baseline found."

I try it by USB Key(HPE Key utility 3.0 on SPP ISO), black screen saying "baseline cannot be mounted" appears,

I try it by remote access SUM from launch_sum.bat on ISO it doesn't acknowledge the ./packages mounted on the Client PC 

please advise on why DL360 cannot read SPP baseline, and solutions on how to take care of it.

Thanks in advance

3 REPLIES
RR33
HPE Pro

Re: baseline not found : SPP to Proliant DL360 gen9

Are we using a USB DVD drive?

Can we try the ISO thru ILO mount and use IP(intelligent provisioning) ?

I´m a volunteer in the HPE Forum.
If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The opinions expressed are the personal opinions of the authors, not of Hewlett Packard Enterprise.
Torsten.
Acclaimed Contributor

Re: baseline not found : SPP to Proliant DL360 gen9

Did you check md5 sum of the ISO?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
DeepaD
HPE Pro

Re: baseline not found : SPP to Proliant DL360 gen9

Confirm if the SPP ISO image you are using is of size : (5.6 GB)

You could download it from below URL
Service Pack for ProLiant
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_85633fd81ad7456dbf6c8a7137

Type: Application (Entitlement Required) - System Management
Version: 2017.10.1(31 Oct 2017)

Once downloaded, extract the SPP.ISO image and use the SUM file included in this package
Once you launch, it should create a baseline

If any issue in update from OS. Try to update in offline mode, by booting directly from the ISO image.

 

I´m a volunteer in the HPE Forum.