ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

binding two network cards for load balancing

 
Ayman Altounji
Valued Contributor

binding two network cards for load balancing

I have three network cards in a new server and would like to know if I can somehow bind them together to share the load on the network, for load balancing and redundancy. All three use the n100 driver.
2 REPLIES
Ayman Altounji
Valued Contributor

Re: binding two network cards for load balancing

Please reference the NSSD Help for information on NFT (Network Fault Tolerance) , NIC Teaming and Load Balancing .

Additional Tips ...

NIC Teaming with the Intel - NC3122 and NC3131 in Netware


Maximum Teaming Configurations For Some Compaq NICs
Ayman Altounji
Valued Contributor

Re: binding two network cards for load balancing

I'm trying to configure the nssd software on the server. I have expanded the nssd_a.600 directory a have located it on the root of sys. When using nwconfig to install, I get an error saying that the "operation aborted because the sys:system\products.dat file could not be accessed". I can manually access a file of that name in that location just fine. Notepad opens it up to a bunch of machine language. I've tried installing it from the c.: through rconsole, from the server, from within the system directory...I'm stumped....
By the way thanks for responding so quickly to the last request.
Rob