blades power problem

[BAUKnight]

dear all,
i have an environment with HP rack that contains 4 BL20p G3 enclosure, once we get error appearing inthe first page of the attached file, and when we tested it i found the LED number 4 in the second page of the attached file is RED,,, any one has an idea what is the problem and how i can solve the issue...
by the way,, most of the 30 BL20p has Microsoft windows 2003 and about 2-5 blades has other OS..
i am not in a hurry,,, but i need a solution
THx

[raadek]

OK, there are probably two possible explanations:

1) Check exactly what it says on the tin: are your all power supplies working, plugged, etc?

2) If the answer is yes, then upgrade ALL firmware levels on EVERYTHING - i.e. blades, enclosures, etc.

Rgds

[BAUKnight]

yes, all my pwoer supplies are plugeed and working properly, the LEDs all green from the fron view of the rack, all the power supplies, blades, patch panels..etc.
if i have to upgrade the firmware, how can i install thelatest from the internet, and how can i install them on the machines
blade , enclosure , power enclosure
Thx

[BAUKnight]

the error is cleared