ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

blades power problem

BAUKnight
Frequent Advisor

blades power problem

dear all,
i have an environment with HP rack that contains 4 BL20p G3 enclosure, once we get error appearing inthe first page of the attached file, and when we tested it i found the LED number 4 in the second page of the attached file is RED,,, any one has an idea what is the problem and how i can solve the issue...
by the way,, most of the 30 BL20p has Microsoft windows 2003 and about 2-5 blades has other OS..
i am not in a hurry,,, but i need a solution
THx
3 REPLIES
raadek
Honored Contributor

Re: blades power problem

OK, there are probably two possible explanations:

1) Check exactly what it says on the tin: are your all power supplies working, plugged, etc?

2) If the answer is yes, then upgrade ALL firmware levels on EVERYTHING - i.e. blades, enclosures, etc.

Rgds
Don't panic! [THGTTG]
BAUKnight
Frequent Advisor

Re: blades power problem

yes, all my pwoer supplies are plugeed and working properly, the LEDs all green from the fron view of the rack, all the power supplies, blades, patch panels..etc.
if i have to upgrade the firmware, how can i install thelatest from the internet, and how can i install them on the machines
blade , enclosure , power enclosure
Thx
BAUKnight
Frequent Advisor

Re: blades power problem

the error is cleared