ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

block-device modules error messages

Ayman Altounji
Valued Contributor

block-device modules error messages

Hi, my harware config ML370 512M RAM,SMART 3200 with 2x18G RAID1, DAT20/40G
I installed RH6.2 then upgraded my kernel to 2.2.16-3 and updated Nic driver.
Following instructions, I configured Health and Wellness, then Insight agents. Everything works fine except that I constantly get the following message modprobe: modprobe: Can't locate module block-major-8
I get the same message but only once for majors 73 and 74.
I don't want to disable modules in /etc/conf.modules if I don't know what's going on.
Can anyone help ? Thanks.
Ayman Altounji
Valued Contributor

Re: block-device modules error messages

Further infos about my problem :
cma.log gives error message :
IDAGETPCIINFO ioctl return code = -1

Current cpqarray module version is 1.0.6.
Is there anything to do with cpqarray module ?
Thanks for your help.