blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

[HAKANSAYGI]

Hi

ML370G3 server crash several times with the fallowing errors
Blue Screen Trap (BugCheck,STOP:0x000000D1 (0x7266748E, 0x00000002, 0x00000000, 0xBF019ACD))
Blue Screen Trap (BugCheck,STOP:0x0000001E

Blue Screen Trap (BugCheck,STOP:0x000000D1

we are in urgent sitiuation, help please?

[kris rombauts]

Hakan,

make sure if you use the management agents that they are up to date (version 7.x) since some of those above mentioned dumps have been caused by management agents issues.

http://h18023.www1.hp.com/support/files/server/us/locate/20_4307.html#131

hth

Kris

[HAKANSAYGI]

Kris,

all agents installed with Foundation Pack 6.40. I think that this means that agent versions are 6.40. I will install the Support Pack version for Win2K 7.00A.

Hakan

[Leonard Davison]

Hakan...

This indicates that a driver caused
an access violation. It attempted to access memory address in use by something else.

Is the faulting driver displayed on the blue screen? You could also download
the Win2k symbols and run the dump file through the Windows Debugging Tools.
Also check MS Support Site:

http://support.microsoft.com/default.aspx?scid=kb;en-us;q183169

[Tarek Kawach]

Hakan:

Check out this MS article

Stop 7F, 0x00000008 (double-fault) error occurs because of a single-bit error in the ESP register
http://support.microsoft.com/default.aspx?scid=kb;en-us;842465

make sure you have the latest firmware for the server.

Systems ROMPaq Firmware Upgrade Diskette for ProLiant ML370 G3 (P28) Servers
version 4.11 P28-08/05/2004 (17 Aug 04)
http://h18023.www1.hp.com/support/files/server/us/download/21517.html


if the problem not resolved; then replace the processors.
as it could be a processor issue;
HP has fixed the micocode from intel in the new firmware upgrade,

Most of the time Replacing Processor will fix issue.



Best regards,

Tarek.

[bsikenny]

I have the same problem happened to my Compaq Proliant 6400R server with Windows 2000 sever installed.
I can't even start my Windows again. Can someone help ?