ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

 
HAKANSAYGI
Occasional Visitor

blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

Hi

ML370G3 server crash several times with the fallowing errors
Blue Screen Trap (BugCheck,STOP:0x000000D1 (0x7266748E, 0x00000002, 0x00000000, 0xBF019ACD))
Blue Screen Trap (BugCheck,STOP:0x0000001E

Blue Screen Trap (BugCheck,STOP:0x000000D1

we are in urgent sitiuation, help please?
5 REPLIES
kris rombauts
Honored Contributor

Re: blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

Hakan,

make sure if you use the management agents that they are up to date (version 7.x) since some of those above mentioned dumps have been caused by management agents issues.

http://h18023.www1.hp.com/support/files/server/us/locate/20_4307.html#131

hth

Kris

HAKANSAYGI
Occasional Visitor

Re: blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

Kris,

all agents installed with Foundation Pack 6.40. I think that this means that agent versions are 6.40. I will install the Support Pack version for Win2K 7.00A.

Hakan
Leonard Davison
Frequent Advisor

Re: blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

Hakan...

This indicates that a driver caused
an access violation. It attempted to access memory address in use by something else.

Is the faulting driver displayed on the blue screen? You could also download
the Win2k symbols and run the dump file through the Windows Debugging Tools.
Also check MS Support Site:

http://support.microsoft.com/default.aspx?scid=kb;en-us;q183169
Tarek Kawach
Honored Contributor

Re: blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

Hakan:

Check out this MS article

Stop 7F, 0x00000008 (double-fault) error occurs because of a single-bit error in the ESP register
http://support.microsoft.com/default.aspx?scid=kb;en-us;842465

make sure you have the latest firmware for the server.

Systems ROMPaq Firmware Upgrade Diskette for ProLiant ML370 G3 (P28) Servers
version 4.11 P28-08/05/2004 (17 Aug 04)
http://h18023.www1.hp.com/support/files/server/us/download/21517.html


if the problem not resolved; then replace the processors.
as it could be a processor issue;
HP has fixed the micocode from intel in the new firmware upgrade,

Most of the time Replacing Processor will fix issue.



Best regards,

Tarek.
Hey, look a light at the end of the tunnel.
bsikenny
Occasional Visitor

Re: blue screen trap 0x0000007F, 0x0000001E and 0x000000D1

I have the same problem happened to my Compaq Proliant 6400R server with Windows 2000 sever installed.
I can't even start my Windows again. Can someone help ?