cancel
Showing results for 
Search instead for 
Did you mean: 

boot problem

Jim Herman
Occasional Contributor

boot problem

I have a ML330 that's been very stable. I shut it down to unplug an internal tape drive. When I restarted it boots, shows the memory total, gives the warning that the case had been opened and then just stops. It just freezes at that point. F10 does not work. Any idea's of where to begin?

Thanks
1 REPLY
Mark Cloutier
Respected Contributor

Re: boot problem

Please make sure the case is securely closed. Cold boot the server and then try a warm boot.
Once you can get into the RBSU then you can change what happens with an intruder alert.
Please keep me posted on the results.

Thank you,

Mark
We are here for a good time, not a long time!