HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

burning HP ISO images to flash drive

 
SOLVED
Go to solution
kkpro
Regular Advisor

burning HP ISO images to flash drive

Hi,

 

When using "default" utility - "HP USB key Utility", version 1.7 - process of burning is always slow, now trying to burn new SPP - lasts hours.

There are a lot of other utilities, for example "Rufus ISO", seems to fastest, - same SPP was about 2-3 minutes, but when booting this flash drive, always got strange errors, like "Can not find kernel image vesamenu.c32" and such.

Any suggestions ?

1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: burning HP ISO images to flash drive

USBKey Utility 1.7 cannot process the current 2015.04 SPP because it is too large.

 

Use Version 1.8 (32-bit) or better version 2.0 (64bit) from the SPP ISO.

 

Version 1.8:

http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=MTX_0707359ff39b4d338e76dd0905#tab-history

 

Version 2.0:

inside the SPP ISO - http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/Unable-to-download-HP-Service-Pack-for-ProLiant-for-under/m-p/6732201#M148030


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!