ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

c3000 instalation

Eugeniy_I
Occasional Visitor

c3000 instalation

We have bought a new c3000 with BL460c pre-instaled but in standart kit there are no any cables to connect the keyboard and monitor. Whether I can instal OS in another way?
5 REPLIES
Pogumirskiy Nikolay
Frequent Advisor

Re: c3000 instalation

Configure OA (Onboard Administrator) as described in manual. Connect to OA and open Remote Console for needed blade. You may attach iso-image to blade and install OS.
Eugeniy_I
Occasional Visitor

Re: c3000 instalation

I don't have even a manual...
but i have found a way to start remote console on my laptop and now i have a problem with my bl460. The blade do not starting, on the front panel Health LED blinks the red.

On the Insight Display:
A iLO2 failure has been detected. Make sure you have a suitable iLO2 firmware loaded (must be at least 1.30)
Reseating the blade or resetting iLO2 may also help.

On the iLO2 microchip - 1.70
THAKUR
Frequent Advisor

Re: c3000 instalation

Download the latest ilo2 fw from hp.com
Pogumirskiy Nikolay
Frequent Advisor

Re: c3000 instalation

Eugeniy_I
Inspect BL460c status in OA Manager. What number of blades and power supplies installed in your C3000?
Try to update iLO firmware as Thakur says and reseat blade.
Eugeniy_I
Occasional Visitor

Re: c3000 instalation

The problem was in enlosure settings of iLO, I have only restore the defaults and system starts correctly