ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

can not boot from floppy and cd-rom-proliant 1600 dual pii400

Steve Yang_2
Advisor

can not boot from floppy and cd-rom-proliant 1600 dual pii400

I found I can not boot from floppy and cdrom when I failed to upgrade system partision. Therefor there is no way for me to run smartstart.

any ideas?

Thank you in advance
steve_yxf
3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: can not boot from floppy and cd-rom-proliant 1600 dual pii400

Hi,

Which server you having is it having any rilo 2 card. if it is there then you can try to configure it. No other way since get fdd and cd rom working.

Regards,
Prashant S.
Nothing is impossible
Prashant (I am Back)
Honored Contributor

Re: can not boot from floppy and cd-rom-proliant 1600 dual pii400

Hi,

Check doccument
http://h18013.www1.hp.com/products/servers/management/remote-lightsout/server-slot-matrix.html

for rilo support.

regards,
Prashant S.
Nothing is impossible
Steve Yang_2
Advisor

Re: can not boot from floppy and cd-rom-proliant 1600 dual pii400

Thank you for reply.

I have resolved the problem by the following:

1. Erase all configuration by Compaq Erase Utility.

2. Set CDROM from slave to master, which is default.

3. Start smart start succesfully

Regards,

Steve
steve_yxf