check disks

[SAPIENZA]

Hi, I have a Server ml310 g4 with two disks sas 73g raids 1, system windows 2003 standards.
I would like to know how I can check the state of health of my disks from the operating system

[KarloChacon]

well you could use

HP ProLiant Array Configuration Utility for Windows
The HP Array Configuration Utility is a web-based application that helps you configure HP ProLiant SMART-2 Array Controllers, .....




HP ProLiant Array Diagnostics Utility for Windows-> is a web-based application that creates a report of all HP storage controllers and disk drives. This report provides vital information to HP service personnel to assist in identifying faults or conditions that may require attention.

you cna find them here
http://h18023.www1.hp.com/support/files/server/us/locate/69_6308.html#58

or HP System Management Homepage for Windows

regards

[SAPIENZA]

Hi, I have installed the software but it tells me that it doesn't find any controllers.
My controller is the following:
sas 3000 8 ports witch 1068.

[SAPIENZA]

This is a photo of the screened of the program.

[KarloChacon]

sorry ACU only monitors Smart Arrays

try this
http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html
download - Miscellaneous

http://www.lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/index.html

regards