1753856 Members
7331 Online
108809 Solutions
New Discussion юеВ

Re: compaq ml350

 
SOLVED
Go to solution
Marc Maxwell
New Member

compaq ml350

Hi,

I am trying to upgrade the RAM in this compaq server. It has two 128 MB dimm's that work in any slot. They have the following information on labels (the memory that works):

MT18LSDT1672G-133C2
PC133-333
us 0008aaqD.002
128 mb, sych, 133 Mhz, CL3, ECC
P/N 127007-021



I tried putting in some 512 MB ECC RAM from Kingston (two of them) but it didn't work. It is labeled as 'RECC' and R030204, Infineon brand. The server doesn't acknowledge that they exist.


I need to get at least 1 GB of ram in this box to get it up and running for what we want to do with it. So I cannot just put the same thing in; it must be 2 x 512MB.

Do I have to do anything in the BIOS to get it to see the new ram? Where do I go from here?
Any info is appreciated!

Thanks
Marc
3 REPLIES 3
timmy b.
Honored Contributor
Solution

Re: compaq ml350

Give this a shot:

http://www.ec.kingston.com/ecom/configurator/modelsinfo.asp?SysID=9036&mfr=HP%2FCompaq&model=ProLiant+ML350&distributor=0&submit1=Search

Good Luck - Tim
There are 10 kinds of people in this world: Those who understand Binary, and those who don't.
kcpant
Trusted Contributor

Re: compaq ml350

Hi Marc,

For sevrers the RAM sticks are somewhat special, they have a small chip on them ( SPD EPROM) which has some proprietary information on it.Any RAM without matching information will not work. Kingston also makes HP compatible RAM, so when you ordering RAM from any third party, do mention the part number of existing RAM.
PreSales Specialist
Brian_Murdoch
Honored Contributor

Re: compaq ml350

Hi Marc,

The ML350 G1 (600-933Mhz model)can take up to 2Gb RAM. The 1000Mhz model (different system board) can take up to 4Gb RAM. The RAM type is the same for each model, PC133-Registered ECC SDRAM.

Here are the option (sales) part numbers.

128279-B21 - 512-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit

128280-B21 -1024-MB PC133-MHz Registered ECC SDRAM DIMM Memory Option Kit (supported by 1-GHz models only)

If you have the 600-933Mhz model then you can add two of the 128279-B21 items into the two remaining memory slots. (Or fit 4 or them for a total of 2Gb by removing the 128Mb dimms)

You could also search on E-bay for example using the option (sales) part number or the Compaq spare (service) part number for the 512Mb dimm. The Compaq spare part number for this dimm is 159227-001.

HP Partsurfer will also provide prices for these items.

http://partsurfer.hp.com/cgi-bin/spi/main

I hope this helps,

Brian