ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

compaq proliant ML350 raid 5 recovery

govnet
Occasional Visitor

compaq proliant ML350 raid 5 recovery

one of our department used 3 scsi disks initially to configure RAID 5

now one seems to have failed and when i replace the disk from bios [also replace failed one physically] it says replaced and needs recovery

when i continue the server just says configured for windows 2000/NT and attempts to boot from floppy , then CD , then goes to c:\ .. all this happens instantly ..

then it just goes to a horizontal cursor blinking waiting there..

any suggestions as to what is happening

3 REPLIES
divakar.k
Valued Contributor

Re: compaq proliant ML350 raid 5 recovery


-> Boot from the smart start CD, At welcome screen, Click on maintenance and then Array configuration Utility, Check the logical drive status.
govnet
Occasional Visitor

Re: compaq proliant ML350 raid 5 recovery

one disk failed .. there three

does ACU support repair option

i can see the ROM araay utility saying its in recovery mode but even though left it for 9 hours nothing happened
Bhavnish
Frequent Advisor

Re: compaq proliant ML350 raid 5 recovery

Hi,

Had u checked the controller order from Bios.
And if possible pls attach the ADU report. You can collect the same from Smart Start CD.

Maintance -> Array Diagnostic Utility

Just save this report and attach if possible.
Everything is Possible+++