HPE Community
ProLiant Servers (ML,DL,SL)
1752782 Members
6318 Online
108789 Solutions
New Discussion юеВ

Re: configure DB array as SB array

 
SOLVED
Go to solution
VeronicaTobon
Advisor

тАО06-12-2008 02:08 PM

тАО06-12-2008 02:08 PM

configure DB array as SB array

Is possible to configure a Dual bus storage array as a single bus array?
I have a 302970-b21 db storage array and I want to configure with only one scsi cable.
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО06-13-2008 01:13 AM

тАО06-13-2008 01:13 AM

Solution

Re: configure DB array as SB array

I think this was already solved in your other thread:

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1239685

The difference between the SB and DB model is the I/O module.

If you connect only 1 cable to the DB module, you have only the left *OR* right half connected.

Replace the DB with a SB module to get the SB model.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Torsten.
Acclaimed Contributor

тАО06-13-2008 01:14 AM

тАО06-13-2008 01:14 AM

Re: configure DB array as SB array

Remember to read this:

http://forums12.itrc.hp.com/service/forums/helptips.do?#33

;-)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
VeronicaTobon
Advisor

тАО06-13-2008 05:15 AM

тАО06-13-2008 05:15 AM

Re: configure DB array as SB array

ok, we'll buy nee modules.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.