ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

configuring Array Controller in DL380 G( server

 
aedward
Occasional Visitor

configuring Array Controller in DL380 G( server

i just got a new server HP DL380 gen 9 server , on the intelligent provisioning , all am seeing is unassigned drive and physically i can see 8 new hard drives (SAS) . i can creat array controller . any way out.
2 REPLIES 2
NareshISS
Advisor

Re: configuring Array Controller in DL380 G( server

Hello ,

please open intelligent provisioning  then Smart storage administrator  - select the controller -- create the Raid

 

Regards, Naresh Sharma

I am an HPE Employee.
aedward
Occasional Visitor

Re: configuring Array Controller in DL380 G( server

Dear Naressh ,

 

thanks for your response but unfortunately when you click on the Array controller , click on configure on the right side of the menu , the following are displayed as highlighted below  under Actions:

modify controller

advsanced controller sretting

modify spare activation mode

clear configuration'

manage power setting

set bootable logical drive/value

manage device identification leds

no room to select the controller -- create the Raid , that is not displayed on anywhere on the menu.

this is a new server and this is the first time of opening and setting it up .

what is the way out ? , does it have to with service pack 

thanks 

Edward