copy operation will hang when one nic link loss whitch config as teaming

[badnic]

Hi,
I need help of the problem as follow
status:
1.DL380G5 install windows2003R2 and update to sp2
2.install the driver (cp007290.exe)
3.install the NCU tools （cp007172.exe ,8.6 versiion）
4.config teaming as auto mode
problem:
when i copy data to the server,i unplug the nic cable whitch primary of translate and receive data package,this time the copy operation will noresponse ,but i can copy other file to server the link does not loss,just the first copy operation hang.

how can i solve this problem,

need you help

[Ryan Goff]

How does each port perform with teaming turned off? Try using one port at a time to see if there is a problem with a specific port first.

Try updating the NIC firmware found here:
http://h18023.www1.hp.com/support/files/server/us/download/25605.html

[badnic]

thanks
yes when I disable the teaming every port work normalï¼ i'll update the firmware and test

[badnic]

thanks
yes when I disable the teaming every port work normalï¼ i'll update the firmware and test

[Pieter 't Hart]

what are these nic's connected to?
is it the same switch or two different switches,
teaming is setup as auto, but what is the resulting mode ?
is it failover, failover with preferred, load balancing, or etherchannel.

I assume it's most likely MAC-related.
the running connection caches the mac-adress of the first nic, wich is also cached by the switch in its forwarding table.

Pieter