cancel
Showing results for 
Search instead for 
Did you mean: 

cpqarry21

 
SOLVED
Go to solution
Ramiro Zabala
Occasional Visitor

cpqarry21

I have a message : The device \Device\Scsi\cpqarry21, is not ready for access yet
6 REPLIES
Oleg Koroz
Honored Contributor

Re: cpqarry21

Make sure you have updates for System ROM, Firmware for SCSI Controller and driver, what device connected to Array Controller, except hard Drives?
http://h18023.www1.hp.com/support/files/server/us/index.html
Ramiro Zabala
Occasional Visitor

Re: cpqarry21

1.-latest bios version (SP 23649)ver 4.12
2.-ONLINE romflash integrated smart array cp002238
3.-HP ProLiant Drive Array Driver for Windows 2000/Server 2003 » 5.20.0.32 C
23 Apr 03

any additional device is connected
Ramiro Zabala
Occasional Visitor

Re: cpqarry21

Autoloader tape is connected in scsi port2.
Array disks are in scsi port 1
Server is ml 370 g1
Oleg Koroz
Honored Contributor
Solution

Re: cpqarry21

use different card for Tape Drive Instead Array Controller, or at least disconnect temporarily
kcpant
Trusted Contributor

Re: cpqarry21

Hi Ramiro,

as KOV said, do not use tape drive on the same controller on which HDDs are installed, use another SCSI controller for this purpose. the tape drive's I/O speed is very slow in comparision to HDD, so, when winodws boots up, the disks take more time than expected to respond when winodws sends a signal of "chekup" to the disk array. the cure is, never use tape drive on RAID adapter.
PreSales Specialist
Ramiro Zabala
Occasional Visitor

Re: cpqarry21

KOV,i taked out the autoloader and put in other server, the message still remains